Clay Products
ClayRite
ClayRite 100%: is 100% concentrated liquid clay inhibitor / surfactant designed and blended by DrilRite-Chem LLC. It is used in HDD to aid in reducing the clays tendency to swell during drilling operations and down time. After desired viscosity is achieved add 12.8 oz per 500 gal of drilling fluid.
Shipped in 1 gallon jugs pre- marked for proper mixing amounts.
Sapp Sticks
DetRite
DetRite 100%: is a 100% concentrated drilling detergent designed and blended by DrilRite-Chem LLC. It reduces the surface tension and reduces sticking tendency of clay cuttings. This aids in prevention of bit balling, mud rings, and reduces torque.
Shipped . Shipped in 1 gal jugs pre-marked for mixing. Add 12.8 oz per 500 gal of drilling fluid.
Sapp Stick: This is a product similar to ThinRite in a solid 5/8" O.D. stick. They can be cut in half and placed directly into the drill pipe upon connections, to act as a low vis / acidic sweep to aid in bit balling, mud rings and extreme viscosity that creates increased tor
Sure Flow Clay
SureFlow Clay is a proprietary drilling fluid additive blended by DrilRite-Chem LLC for use in all clay formations. When added to drilling fluid slurry, it exhibits unparalleled clay inhibition, sticking reduction, and torque reduction. This product has been field tested with 100% satisfaction by multiple HDD companies in multiple applications throughout the U.S. This product is non-hazardous to the environment.
Mixing
SureFlow Clay is conveniently pre-mixed and packaged for ease of use. This allows for minimal drilling fluid mixing knowledge, labor, and waste. Use the pre-marked jug label for proper measuring.
Simply add 12.8 oz. of SureFlow Clay along with 1 Qt of PolyRite or VisRite per 250-gallons of water.
Or
After pre-mixing the appropriate amount of bentonite, add 12.8 oz. of SureFlow Clay per 250-gallons of fluid
Sand Gravel Rock
Sure Flow Sand
SureFlow is a proprietary drilling fluid additive blended by DrilRite-Chem LLC for use in sand, gravel, and rock formations. When added to a bentonite slurry, it exhibits unparalleled gel strength, fluid loss prevention, and flow properties. This product has been field tested with 100% satisfaction by multiple HDD companies in multiple applications throughout the U.S. This product is non-hazardous to the environment.
Mixing
SureFlow is conveniently pre-mixed and packaged for use with 500-gallon, 750-gallon, or 1000-gallon mix tanks. This allows for minimal drilling fluid mixing knowledge, labor, and waste.
Simply add 1 bag bentonite for sand or 1.25 bags of bentonite for gravel per 250 gallons and the appropriate sized SureFlow container to the mix tank. When reclaiming, add 1 bag of SureFlow with every 6 bags of bentonite until desired viscosity is reached.
PacRite-R
PacRite-R: is a 92% polyanionic cellulose water-soluble polymer designed to control fluid loss and increases viscosity in water-based drilling fluids. This in short, seals the tiny holes and cracks in the surface of the bore wall. It creates a wall cake that aids in reducing the amount of fluid absorbed by the formation that could cause sloughing and pack off down hole.
Other DrilRite Products
PolyRite
PolyRite is a high-molecular-weight, anionic liquid polymer designed to aid in cuttings encapsulation and formation stabilization. It’s also a viscosifier, friction reducer and flocculant. Assure PH is 9-9.5 with Soda Ash and add ½ - 2 qts per 100 gallons of fluid or pour a qt directly in drill pipe to act as a high vis sweep.
Best-O-Life Stinger Rod Grease
Available in Copper or White 1-5 gallon pails
Gel-Rite
Gel-Rite is a high-yield, 200 mesh, extended 200 yield sodium bentonite. It is designed to maintain borehole integrity in horizontally drilled boreholes. Gel-Rite is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals - Health Effects.